| Error Code |
Description |
Resolution |
|---|
| 4 |
This error code can occur if a button is stuck in the engaged position when the monitor resets or powers on. |
Resolution |
| 18- or 19- |
These error codes are associated with the USB flash drive. |
Resolution |
| 128- |
This error code is associated with external software connected to the PM5. |
Resolution |
| 130- |
This error code means that there is a corrupt file in the memory of the PM5 monitor. |
Resolution |
| 396- |
This error code can occur when the PM5 cannot deliver notifications to a mobile device at a necessary rate. |
Resolution |
| 575- |
This error code is related to improper voltage reading, most likely related to loose batteries due to a poorly fitting battery door. |
Resolution |
| 779-1 |
This error code is a result of damaged pins inside the RJ45 jack, usually caused by inserting a non-RJ45 plug into this port. |
Resolution |
| 886 |
This error code can occur when removing and replacing batteries. |
Resolution |
| 12008- |
This error code can occur when there is a device competing to make a Bluetooth connection with the PM5. |
Resolution |
| 2220- |
This error code can occur after the firmware on the PM5 has been updated. |
Resolution |
| 22291- |
This error code can occur when the PM5 cannot deliver notifications to a mobile device at a necessary rate. |
Resolution |
